How Poor Roof Insulation Can Increase AC Load


BaytWatt Guide

How Poor Roof Insulation Can Increase AC Load

When roof thermal resistance is low, more heat can flow indoors during hot periods. The AC has to remove that additional load to maintain the thermostat setpoint.

Written and reviewed by the BaytWatt Editorial Team•MethodologySources

The basic relationship

Conductive heat flow depends on roof area, U-value, temperature difference and time, so a large roof with high U-value can add significant load.

Thermal load is not electricity use

To translate cooling load into approximate electricity, AC efficiency such as COP must also be considered.

Solar exposure makes reality more complex

Roof surface temperature can rise well above air temperature in sun, so a simple indoor-outdoor temperature model remains an approximation.

Measurement is better for major investments

Surface-temperature measurements, an energy audit or building model can provide more confidence for large retrofit decisions.

Compare an improved insulation scenarioOpen calculator

Frequently asked questions

Does a higher roof U-value raise the bill by the same percentage?

No. Whole-home consumption also depends on many other loads and AC efficiency.

Are top-floor rooms usually more affected?

They can be because of roof exposure, but the actual roof assembly determines the result.

Can roof area alone predict the impact?

Not by itself. U-value, temperature conditions and cooling hours are also needed for an estimate.

Continue exploring

Scroll to Top