What AC Size for a 20, 25, 30 or 40 m² Room?
There is no BTU-per-square-metre table that fits every Saudi home. BaytWatt uses a simplified model based on room volume and then adjusts for sun, insulation, glazing, roof exposure and occupants.
Not every 20 m² room has the same load
A 2.8 m high room with good insulation and low sun differs from a top-floor west-facing room with large glazing.
For 25 and 30 m², load factors still matter
Larger floor area increases the base load, but nominal AC size should be selected from an indicative range rather than a rigid area table.
A 40 m² space can require more than one design choice
Large open-plan rooms or high ceilings may justify a professional load calculation or different air-distribution strategies.
Use the calculator instead of a fixed table
Enter floor area, height, solar exposure, insulation, glazing and occupants. The result gives a range and nearest common capacity, not a substitute for professional HVAC design in complex cases.
Frequently asked questions
Can I just use a fixed BTU per m² rule?
Fixed rules oversimplify because ceiling height, sun and insulation vary.
Is 24,000 BTU right for 40 m²?
It can be suitable in some scenarios and unsuitable in others; use actual room inputs.
When should I use a professional load calculation?
For villas, open-plan spaces, large glazing, unusual loads or estimates near the boundary between common sizes.